Installed three types of bed cargo nets from BestEVMod / EVVida

nbbskcawsw said:

Good tips. I see that you were able to install the MOLLE vault cargo divider without cutting the bed liner as others do to make space as the added thickness of liner makes mounting divider impossible. Is that divider in the picture the same as the one being sold at Tesla Shop? Or is the liner you have somewhat thinner?

Click to expand...

getsometom said:

I decided to try out the three different types of cargo nets for the bed from @BestEvMod(AOSK) / EVVida.

Cargo Net (net + 4 ABS carabiners):
I originally thought it would not be able to stretch too far but to my surprise, it was stretchy enough to accommodate various anchor points. I attached one side to the top of the bed closest to the gate then tried both sets of D-ring anchor points on the bed. Both bed D-ring locations will work. I ultimately settled on the pair of bed anchor points closer to the gate. I also tried a few other anchor variations with the attached pictures. This net feels most customizable with the various anchor point locations available in the bed of the Cybertruck.
https://ev-vida.store/products/bed-net-for-cybertruck?rs_ref=xFvJg2cX

Envelope Net (net + 4 ABS carabiners + 2 metal L-track hooks):
This is the net I was mostly curious about as it offers easy access from the bed gate. Unlike the other nets, this envelope net also came with 2 metal L-track anchor hooks that looks and feels like the OEM Tesla versions, I cannot tell them apart. After installing both L-track anchor hooks and adjusting the location of the bottle opener, the net was a quick clip into the 4 hook locations. The envelope net pairs nicely with the cargo net since they're both located next to each other. I'm able to keep my permanent accessories in the storage locker while temporary items can be stored in these nets. Both nets also cradle my two instaCrates nicely so they don't move around during driving for additional organization and storage.
https://a.co/d/0bcDgE8s

Whole Bed Net (net + 4 ABS carabiners):
The whole bed net does not require any additional hooks. All 4 anchor points are on the side of the bed and hooks up easily. This net will not work with the bed divider so I will keep it in my storage locker for when it is necessary for usage.
https://a.co/d/05QgBOkf

Also a quick shout out for the stainless steel license plate frames

Silhouette frame
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

Graffiti frame
https://makerspacedude.etsy.com/listing/1717907620/cybertruck-graffiti-stainless-steel

CYBERBEAST frame
https://makerspacedude.etsy.com/listing/1722675176/cyberbeast-graffiti-stainless-steel

Graffiti vanity plate
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-decorative

CYBERBEAST vanity plate
https://makerspacedude.etsy.com/listing/1730692568/cyberbeast-vanity-decorative-license

Click to expand...

HaulingAss said:

All the listings for these products are a mess. Both on Amazon and the company's website. They all claim to come with reinforced plastic hooks (or the "OEM style" L-track hooks) , yet many of the photos, and the video depict a metal carabiner. It's impossible to tell what you will actually get.

I think they figure the price is low enough people will just buy one of the options and keep it, even though it doesn't come with the metal "carabiners".

Do any of them come with the metal biners? Why does the marketing video depict metal biners? Why are there no dimensions listed? If I were marketing these products, I would include the relaxed dimensions and the maximum dimensions in each listing, for the convenience of my customers.

What a hot mess!

Click to expand...

getsometom said:

I decided to try out the three different types of cargo nets for the bed from @BestEvMod(AOSK) / EVVida.

Cargo Net (net + 4 ABS carabiners):
I originally thought it would not be able to stretch too far but to my surprise, it was stretchy enough to accommodate various anchor points. I attached one side to the top of the bed closest to the gate then tried both sets of D-ring anchor points on the bed. Both bed D-ring locations will work. I ultimately settled on the pair of bed anchor points closer to the gate. I also tried a few other anchor variations with the attached pictures. This net feels most customizable with the various anchor point locations available in the bed of the Cybertruck.
https://ev-vida.store/products/bed-net-for-cybertruck?rs_ref=xFvJg2cX

Envelope Net (net + 4 ABS carabiners + 2 metal L-track hooks):
This is the net I was mostly curious about as it offers easy access from the bed gate. Unlike the other nets, this envelope net also came with 2 metal L-track anchor hooks that looks and feels like the OEM Tesla versions, I cannot tell them apart. After installing both L-track anchor hooks and adjusting the location of the bottle opener, the net was a quick clip into the 4 hook locations. The envelope net pairs nicely with the cargo net since they're both located next to each other. I'm able to keep my permanent accessories in the storage locker while temporary items can be stored in these nets. Both nets also cradle my two instaCrates nicely so they don't move around during driving for additional organization and storage.
https://a.co/d/0bcDgE8s

Whole Bed Net (net + 4 ABS carabiners):
The whole bed net does not require any additional hooks. All 4 anchor points are on the side of the bed and hooks up easily. This net will not work with the bed divider so I will keep it in my storage locker for when it is necessary for usage.
https://a.co/d/05QgBOkf

Also a quick shout out for the stainless steel license plate frames

Silhouette frame
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

Graffiti frame
https://makerspacedude.etsy.com/listing/1717907620/cybertruck-graffiti-stainless-steel

CYBERBEAST frame
https://makerspacedude.etsy.com/listing/1722675176/cyberbeast-graffiti-stainless-steel

Graffiti vanity plate
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-decorative

CYBERBEAST vanity plate
https://makerspacedude.etsy.com/listing/1730692568/cyberbeast-vanity-decorative-license

Click to expand...

HaulingAss said:

All the listings for these products are a mess. Both on Amazon and the company's website. They all claim to come with reinforced plastic hooks (or the "OEM style" L-track hooks) , yet many of the photos, and the video depict a metal carabiner. It's impossible to tell what you will actually get.

I think they figure the price is low enough people will just buy one of the options and keep it, even though it doesn't come with the metal "carabiners".

Do any of them come with the metal biners? Why does the marketing video depict metal biners? Why are there no dimensions listed? If I were marketing these products, I would include the relaxed dimensions and the maximum dimensions in each listing, for the convenience of my customers.

What a hot mess!

Click to expand...

getsometom said:

I decided to try out the three different types of cargo nets for the bed from @BestEvMod(AOSK) / EVVida.

Cargo Net (net + 4 ABS carabiners):
I originally thought it would not be able to stretch too far but to my surprise, it was stretchy enough to accommodate various anchor points. I attached one side to the top of the bed closest to the gate then tried both sets of D-ring anchor points on the bed. Both bed D-ring locations will work. I ultimately settled on the pair of bed anchor points closer to the gate. I also tried a few other anchor variations with the attached pictures. This net feels most customizable with the various anchor point locations available in the bed of the Cybertruck.
https://ev-vida.store/products/bed-net-for-cybertruck?rs_ref=xFvJg2cX

Envelope Net (net + 4 ABS carabiners + 2 metal L-track hooks):
This is the net I was mostly curious about as it offers easy access from the bed gate. Unlike the other nets, this envelope net also came with 2 metal L-track anchor hooks that looks and feels like the OEM Tesla versions, I cannot tell them apart. After installing both L-track anchor hooks and adjusting the location of the bottle opener, the net was a quick clip into the 4 hook locations. The envelope net pairs nicely with the cargo net since they're both located next to each other. I'm able to keep my permanent accessories in the storage locker while temporary items can be stored in these nets. Both nets also cradle my two instaCrates nicely so they don't move around during driving for additional organization and storage.
https://a.co/d/0bcDgE8s

Whole Bed Net (net + 4 ABS carabiners):
The whole bed net does not require any additional hooks. All 4 anchor points are on the side of the bed and hooks up easily. This net will not work with the bed divider so I will keep it in my storage locker for when it is necessary for usage.
https://a.co/d/05QgBOkf

Also a quick shout out for the stainless steel license plate frames

Silhouette frame
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

Graffiti frame
https://makerspacedude.etsy.com/listing/1717907620/cybertruck-graffiti-stainless-steel

CYBERBEAST frame
https://makerspacedude.etsy.com/listing/1722675176/cyberbeast-graffiti-stainless-steel

Graffiti vanity plate
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-decorative

CYBERBEAST vanity plate
https://makerspacedude.etsy.com/listing/1730692568/cyberbeast-vanity-decorative-license

Click to expand...

Cam Salazar said:

This is for amateurs. First time truck owner? You will soon realize this was a waste of money, it's useless. You will be dicking around with that thing far more than just organizing things properly between the frunk, back seats and under-bed compartment.

Click to expand...