3D print mount for Uniden radar detector

[gaubong053]

Here is the 3D printed mount I made that fit Uniden radar detector. Just use the old screw from the mirror.

Updated (latest version not block cabin camera) https://www.printables.com/model/847680-uniden-radar-detector-mount-for-cybertruck
Valentine V1 version made by Dclewis: https://makerworld.com/en/models/483915?from=search

Sponsored

 

[Dmayo305]

Where are you getting power from?

 

[gaubong053]

Where are you getting power from?

I tapped 2 wires into the 2-pin connector inside cabin camera housing. That connector provides around 15V which in operation range of Uniden R7/R8

 

[Dmayo305]

I tapped 2 wires into the 2-pin connector inside cabin camera housing. That connector provides around 15V which in operation range of Uniden R7/R8

Nice! I'm currently using a Radenso DS1, but I'm thinking about switching to a V1G2

 

[dantidote]

Ahh, I've been looking at an R8. Does the tonneau cover make these less effective?

 

[Futam84]

I tapped 2 wires into the 2-pin connector inside cabin camera housing. That connector provides around 15V which in operation range of Uniden R7/R8

This is amazing! For those of us that are idiots, can you provide a bit more detail about how to access the power? Again, amazing!

 

[Crissa]

Huh, what size bolt does it use in the slot? Because it looks close to a standard camera mount.

-Crissa

 

[Kuiper__Belt]

Here is the 3D printed mount I made that fit Uniden radar detector. Just use the old screw from the mirror.
https://www.printables.com/model/847680-uniden-radar-detector-mount-for-cybertruck

View attachment 43638 View attachment 43639

Dude! I was thinking about doing the same thing! That’s awesome!

 

[gaubong053]

Ahh, I've been looking at an R8. Does the tonneau cover make these less effective?

I don't think it matter as the whole tonneau is not a solid metal surface. The radar signal can easy go through it. However it will block laser frequency but it doesn't matter as you are screwed when police use laser gun.

 

[gaubong053]

Huh, what size bolt does it use in the slot? Because it looks close to a standard camera mount.

-Crissa

Use the same screw (T20) that attach mirror to the camera housing.

 

[gaubong053]

This is amazing! For those of us that are idiots, can you provide a bit more detail about how to access the power? Again, amazing!

Here is the quick manual
1. Use the instruction from: https://service.tesla.com/docs/Cybe...UID-517B6C63-EA55-49A6-BB38-4B2D43648DB4.html to access cabin camera
2. From above step, you will see a 2-pin white connector (pic2)
3. Buy a wire tap kit: https://www.amazon.com/dp/B097MGX318?psc=1&ref=ppx_yo2ov_dt_b_product_details
4. Print the mount then use the old T20 screw from mirror assembly.

 

[Futam84]

Here is the quick manual
1. Use the instruction from: https://service.tesla.com/docs/Cybe...UID-517B6C63-EA55-49A6-BB38-4B2D43648DB4.html to access cabin camera
2. From above step, you will see a 2-pin white connector (pic2)
3. Buy a wire tap kit: https://www.amazon.com/dp/B097MGX318?psc=1&ref=ppx_yo2ov_dt_b_product_details
4. Print the mount then use the old T20 screw from mirror assembly.

Thank you!

 

[bkandy3]

This is amazing. Thank you! Double sided Velcro wasn’t holding for me.

Anyone have a recommended online 3D printing service for those of us who don’t have a printer? Xometry or craftcloud?

Update: I used Xometry and it was shipped and arrived exactly when they said it would.

 

[Extra300]

Here is the 3D printed mount I made that fit Uniden radar detector. Just use the old screw from the mirror.
https://www.printables.com/model/847680-uniden-radar-detector-mount-for-cybertruck

View attachment 43638 View attachment 43639

This is great. Does it block the in car camera at all?

 

[getsometom]

Here is the quick manual
1. Use the instruction from: https://service.tesla.com/docs/Cybe...UID-517B6C63-EA55-49A6-BB38-4B2D43648DB4.html to access cabin camera
2. From above step, you will see a 2-pin white connector (pic2)
3. Buy a wire tap kit: https://www.amazon.com/dp/B097MGX318?psc=1&ref=ppx_yo2ov_dt_b_product_details
4. Print the mount then use the old T20 screw from mirror assembly.

You are the hero I wished for this entire time.

Sponsored